Pioneer AVH-P6600DVD - Manual (Page 10)

9
Connecting the Units
Connecting and installing the
optical cable connection box
WARNING
• Avoid installing this unit in such a location where
the operation of safety devices such as airbags is
prevented by this unit. Otherwise, there is a dan-
ger of a fatal accident.
• Avoid installing this unit in such a location where
the operation of the brake may be prevented.
Otherwise, it may result in a traffic accident.
• Fix this unit securely with the velcro tape or lock
tie. If this unit is loose, it disturbs driving stabili-
ty, which may result in a traffic accident.
CAUTION
• Install this unit using only the parts supplied with
this unit. If other parts are used, this unit may be
damaged or could dismount itself, which leads to
an accident or trouble.
• Do not install this unit near the doors where rain-
water is likely to be spilled on the unit. Incursion
of water into the unit may cause smoke or fire.
Connecting the optical cable
1. Connect the optical cable and
ground lead to the main unit.
(Fig. 6)
Connect the optical cable so that it
does not protrude from the unit, as
shown in the illustration. Fasten the
ground lead to the protrusion on the
back of the unit.
Fig. 6
2. Connect the optical cable to the
optical cable connection box.
(Fig. 7)
Fig. 7
Installing the optical cable
connection box
• When installing the optical cable
connection box with the velcro
tape. (Fig. 8)
Install the optical cable connection
box using the velcro tape in the ample
space of the console box.
Fig. 8
• When installing the optical cable
connection box with the lock tie.
(Fig. 9)
Wrap the optical cable and connection
box with the protection tape and fasten
with the power code using the lock tie.
Fig. 9
Fasten with the lock tie
Wrap with the protection tape
Velcro tape (hard)
Velcro tape (soft)
Optical cable
Screw