Pioneer AVH-P6600DVD - Manual (Page 4)

3
Connecting the Units
Connecting the power cord
Connect leads of the same
color to each other.
C a p ( 1 * )
When not using this terminal,
do not remove the cap.
ISO connector
Fuse holder
1*
2*
4*
3*
5*
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
Black (ground)
To vehicle (metal) body.
Orange/white
To lighting switch terminal.
Note:
In some vehicles, the ISO connector
may be divided into two. In this case,
be sure to connect to both connectors.
Fuse resistor
Fuse resistor
Speaker leads
White:
Front left +
White/black: Front left ≠
Gray:
Front right +
Gray/black: Front right ≠
Green: Rear left + or Subwoofer +
Green/black: Rear left ≠ or Subwoofer ≠
Violet:
Rear right + or Subwoofer +
Violet/black: Rear right ≠ or Subwoofer ≠
Black
Multi-CD player
(sold separately)
IP-BUS cable
Violet
15 cm
This product
IP-BUS input (Blue)
When you connect separately sold multi-channel
processor (DEQ-P6600) to this unit, do not
connect anything to the speaker leads and system
remote control (blue/white).
Note:
Depending on the kind of vehicle, the
function of 3* and 5* may be different.
In this case, be sure to connect 2* to 5*
and 4* to 3*.