En glish, Setting the timer manually – Pioneer PDP-SX5080D User Manual

Page 47

Using the Electronic Programme Guide (EPG)(for DTV only)

glish

• Select a programme not yet started (then

ENTER or GREEN):

The programme can be set for recording/watching.

Select “Yes” in a confirmation dialogue box (

/ then

ENTER).

• The Programme Timer screen with a list of other preset

programmes information appears.

• You can modify the presettings here (

/, / then ENTER).

• You can register the presettings here (

 or ENTER).

Press RETURN to return to the EPG screen.

• The EPG screen updates with the new presettings.

• A red clock icon appears for the preset programme.

• A yellow triangle icon appears for overlapped presettings.

Press EPG to exit the EPG screen.

With the system switched on, a channel switch alarm message
appears approximately 60 seconds before execution and the
channel is switched a short time before the start of the programme.

Note

• Auto channel select is not executed when the system is in the

standby mode.

• Even in the standby mode, preset programmes can be recorded

as only the plasma television alone wakes up and outputs AV
signals when the preset time comes.

• Finish presetting operations three minutes before the start of

the programme.

• For priorities about overlapped presettings, see

Priority rules for

overlapped presettings on page 48.

• The TIMER indicator on the front of the plasma television lights

up in orange when a programme is preset for recording/
watching.

• Recording may fail because of watching restrictions imposed by

the CA module.

Setting the timer manually

Using the menu, you can also preset digital TV programmes by
specifying their scheduled date and time.

Press HOME MENU.

Select “Setup” (

/ then ENTER).

Select “DTV Setup” (

/ then ENTER).

Select “Programme Timer” (

/ then ENTER).

• The schedule table appears.

Select a programme number (

/ then ).

• You can select any desired programme number.

Specify a date (

/ or 0 to 9, then ).

Specify the start hour/minute and end hour/minute

(

/ or 0 to 9, then ).

Specify a channel number (

/ or 0 to 9, then ).

Register the preset settings after all items are set (ENTER).

• If a preset time is in the past or the channel is locked, an alert

message appears.

• A yellow triangle icon indicates that the recording/watching

may fail due to overlapped presettings.

• If presetting another programme, repeat steps 5 to 9.

• You can preset up to 10 programmes.

10 Press HOME MENU to exit the menu.

Every Day

Every Sun

Mon-Fri

Sat, Sun

Mon.05.Jan

No.

Programme Timer

Date

14:00-15:00

12:00-13:00

Time

007 ***************

001 ************

Channel

Info

Wed.24.Nov 12:34

- - -. - -. - - -

No.

Programme Timer

Date

- - : - - - - - : - -

Time

- - - - - - - - - - - - - - - - - - - - - - - -

Channel

Info

Wed.24.Nov 12:34

- - -. - -. - - -

Mon.05.Jan

No.

Programme Timer

Date

- - : - - - - - : - -

12:00-13:00

Time

- - - - - - - - - - - - - - - - - - - - - - - -

001 ************

Channel

Info

Wed.24.Nov 12:34

This manual is related to the following products:

PDP-SX4280D PDP-4280XD PDP-5080XD