Pioneer P1DAB-S - Manual (Page 23)

Listening to the DAB (XC-P01DAB only)
23
En
Listening to the DAB
(XC-P01DAB only)
DAB (Digital Audio Broadcasting) is a digital transmission
system where audio signals are converted to digital signals
for broadcasting.
DAB broadcasts a group of data called multiplex (ensemble)
which may contain one or more stations (services). Each
station contains a primary service and there may be one or
more secondary services.
This allows several programs or services to be transmitted on
a single frequency.
Selecting DAB
1 Turn on the stereo receiver.
Refer to To turn the power on on page 13 for details.
2 Press the TUNER button on the remote control to select
the TUNER input.
You can also select the TUNER input by pressing the INPUT
button on the remote control repeatedly, or turning the
SOURCE
knob on the stereo receiver.
3 Press the CONTROL RCV button on the remote control.
4 Press the BAND button repeatedly to select "DAB".
Using the auto scan function manually
Using DAB for the very first time
The very first time you use DAB, press the AUTO TUNE
button to run the Auto Scan.
If a new DAB station is introduced, or you move to a new area,
you can run the Auto Scan function again.
1
Select DAB.
See Selecting DAB above for more on this.
2 Press the CONTROL RCV button on the remote control.
3 Press the AUTO TUNE button.
Selecting DAB stations
1 Select DAB.
See Selecting DAB above for more on this.
2 Press the CONTROL RCV button on the remote control.
3 Press the TUNE / button to select a DAB service.
4 Press the ENTER button to listen to the service.
The station is tuned.
While the primary service is selected, brackets < > are
displayed. While the secondary service is selected, brackets
( ) are displayed.
If you select a station that cannot be received properly, “DAB
No Tuned” is displayed.
DAB SIGNAL
SERVICES
MULTIPLEX
(ENSEMBLE)
SERVICES
COMPONENTS
(STATIONS)
BBC
DAB
News
Station name
DAB
S c a n n i n g . . .
BBC
BBC
(BBC5Live)
DAB No Tuned