Using an av input (av2) 20, When connecting the rear display, When using a rear display connected to – Pioneer AVIC-F50BT User Manual
Page 20: Rear video output, 02 connecting the system, Using an av input (av2)
Black plate (20,1)
Using an AV input (AV2)
The navigation unit
20 cm
Red, white
(AUDIO INPUT)
RCA cables
(sold separately)
Yellow
(VIDEO INPUT)
RCA connector
To video output
To audio outputs
External video
component
(sold separately)
! This mode is available when the setting of
video input 2 (AV2) is set to
“On”. (For de-
tails, refer to Operation Manual.)
When connecting the rear
display
The navigation unit
15 cm
RCA connector
Red, white, yellow
(REAR MONITOR
OUTPUT)
To video input
To audio inputs
Rear display with
RCA input jacks
RCA cables
(sold separately)
When using a rear display
connected to rear video output
WARNING
NEVER install the rear display in a location
that enables the driver to watch the video
source while driving.
This navigation system
’s rear video output is for
connection of a display to enable passengers in
the rear seats to watch the video source.
Engb
20
Section
02
Connecting the system