Pioneer RS-P90 - Manual (Page 24)

24
Audio Adjustment
Adjusting the 31 band graphic equalizer (Open state)
Adjustable frequency : 20 Hz to 20 kHz (Every 1/3 octaves, total 31 bands)
Level adjustment range: –12 dB to +12 dB (0.5 dB/1 step)
• You can switch between the left/right combine mode and left/right independent mode at
any time. So even when using the left/right independent mode, you can switch to the
left/right combine mode to perform adjustments.
Note:
• Even when using the left/right combine mode you can switch to display left and right channels, but
adjustments are those performed in the left/right combine mode.
When completing the adjustment
• It is recommended that adjustment settings be stored in memory soon after the adjustments are
completed. Refer to page 42 for memory operations.
8. Switch between right and left to set up the equalizer curve.
Repeat steps 4 to 7 to set up equalizer curves for the left and right speakers separately.
7. Adjust the other bands.
Repeat steps 5 and 6 to adjust to the desired sound.
6. Press the
5/∞ buttons and
adjust the level.
5. Press the
2/3 buttons and select
the desired band (frequency) to
be adjusted.
4. Press the FUNCTION button 1 and select left or right channel.
(Only for L/R mode.)
Each press the FUNCTION button 1 switches left and right channel.
3. Press the FUNCTION button 1 for two seconds and switch between
left/right independent mode (L/R) and left/right combine mode (COM).
2. Press the FUNCTION button 5 to select the 31-band graphic equalizer
mode.
1. Open the cover of the remote
control in the equalizer menu
(refer to page 5).
This switches to equalizer menu
setting screen.