Pioneer BCS-HW919 - Manual (Page 62)

Appendix 62
Appendix
6
Video Output Resolution
When the non-copy protected media is playing back
Video Out
Resolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connected HDMI disconnected
576i 576p 576i
576p 576p 576p
720p 720p 720p
1080i 1080i 1080i
1080p/24 Hz 1080p / 24 Hz 576i 1080i
1080p / 50 Hz 1080p / 50 Hz 576i 1080i
When the copy protected media is playing back
Video Out
Resolution
HDMI OUT COMPONENT VIDEO OUT
576i 576p 576i
576p 576p 576i or 576p
720p 720p 576i or 576p
1080i 1080i 576i or 576p
1080p/24 Hz 1080p / 24 Hz 576i or 576p
1080p / 50 Hz 1080p / 50 Hz 576i or 576p
HDMI OUT connection
y If you select a resolution manually and then
connect the HDMI jack to TV and your TV does
not accept it, the resolution setting is set to
[Auto].
y If you select a resolution that your TV does not
accept, the warning message will appear. After
resolution change, if you cannot see the screen,
please wait 20 seconds and the resolution
will automatically revert back to the previous
resolution.
y The 1080p video output frame rate may
be automatically set to either 24 Hz or 50
Hz depending both on the capability and
preference of the connected TV and based on
the native video frame rate of the content on the
BD-ROM disc.
COMPONENT VIDEO OUT
Connection
Blu-ray Disc, DVD video stream could prevent up-
scaling on analog output.
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always
outputted at 576i resolution.
HB516-RD2_BDEUPPK_ENG.indd 62 2011-06-22 �� 3:46:09