Pioneer X-HM10-S - Manual (Page 14)

11/5/25 X-HM10_20_En.fm
En-14
Advanced CD or MP3/WMA disc playback
By using the Numeric buttons, the desired tracks on the
current disc can be played.
Use the Numeric buttons on the remote control to select
the desired track whilst playing the selected disc.
l
The Numeric buttons allow you to select up to number 9.
l When selecting number 10 or higher, use the “>10”
button.
Notes:
l
A track number higher than the number of tracks on the
disc cannot be selected.
l During random play, direct search is not possible.
To stop playback:
Press the (CD/USB ) button.
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the REPEAT button repeatedly until “Repeat One”
appears. Press the / (CD/USB / ) button.
To repeat all tracks:
Press the REPEAT button repeatedly until “Repeat All”
appears. Press the / (CD/USB / ) button.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on this
page and then press the REPEAT button repeatedly until
“Repeat All” appears.
To cancel repeat play:
Press the REPEAT button repeatedly until “Normal” appears
and “ ” disappears.
Note:
During repeat play, random play is not possible.
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold down RANDOM button on the remote control
until “Random” appears. Press the / (CD/USB / )
button.
To cancel random play:
Press the RANDOM button until “RDM” indicator disappears.
Notes:
l
If you press the button during random play, you can
move to the track selected next by the random operation.
On the other hand, the button does not allow you to move
to the previous track. The beginning of the track being
played will be located.
l In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
l During random play, repeat play is not possible.
Caution:
After performing repeat play, be sure to press the (CD/USB
) button. Otherwise, the disc will play continuously.
You can choose up to 32 selections for playback in the order
you like.
n Direct track search
A. For example, to choose 13
1 Press the “>10” button once.
2 Press the “1” button.
3 Press the “3” button.
B. For example, to choose 130
1 Press the “>10” button twice.
2 Press the “1” button.
3 Press the “3” button.
4 Press the “0” button.
n Repeat play
REPEAT
MEMORY
DIMMER
RANDOM
Selected track number
n Random play
n Programmed play (CD)
1 Whilst in the stop mode, press the MEMORY button on the
remote control to enter the programming save mode.
2 Press the or buttons on the remote control to
select the desired track.
3 Press the MEMORY button to save the track number.
Selected track number