Introduction of setup adjustments, Setting the video input, Setting for back-up camera – Pioneer AVH-P7500DVD User Manual

Page 96: Other functions

Introduction of setup

adjustments

1 Setup menu display

Shows the setup function names.

% Touch A.MENU and then touch SETUP

to display the setup function names.

The setup function names are displayed and

operable ones are highlighted.

# When A.MENU is not displayed, you can dis-
play it by touching the screen.
# You can also display MENU by clicking the
joystick.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function
names, touch PREV.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.

Note

If you do not operate the setup function within
about 30 seconds, the display is automatically re-
turned to the source display.

Setting the video input

You can switch the setting according to the

connected component.

! Select VIDEO to watch video of a con-

nected component as AV source.

! Select M-DVD to watch video of a con-

nected DVD player as S-DVD source.

1 Touch A.MENU and SETUP and then

touch AV INPUT.

2 Touch any of the following touch panel

keys to select the video input setting.

! OFF No video component is connected
! VIDEO External video component
! M-DVD DVD player connected with RCA

cable

# When a DVD player is connected with an AV-
BUS cable, do not select M-DVD or else no pic-
ture is displayed even if you select S-DVD.

Setting for back-up camera

This unit features a function that automatically

switches to the back-up camera video (BACK

UP CAMERA IN jack) when a back-up camera

is installed on your car. When the gear shift is

in REVERSE (R) position, the video automati-

cally switches to a back-up camera video. (For

more details, consult with your dealer.)

! We recommend that you use a camera

which outputs mirror reversed images.

! Confirm the setting immediately whether

the display changes to a back-up camera

video when the gear shift is moved to RE-

VERSE (R) from another position.

! When the display changes to a back-up

camera video during normal drivings,

switch to another setting.

! To return to the source display, press

MENU on the head unit.

1 Touch A.MENU and SETUP and then

touch BACK UP CAMERA.

Other Functions

Section