Setting remote, Setting remote control code type, Setting up the dvd player – Pioneer AVH-P7500DVD User Manual

Page 91: Changing the level, If you forget your code number

4 Touch c or d to select the desired level.

The parental lock level is set.

! 8 Playback of the entire disc is possible

(initial setting)

! 72 Playback of discs for children and

non-adult oriented discs is possible

! 1 Playback of discs for children only is

possible

Notes

! We recommend to keep a record of your code

number in case you forget it.

! The parental lock level is recorded on the disc.

You can confirm it by looking at the disc pack-
age, included literature or on the disc itself.
With discs that do not feature a recorded par-
ental lock level, you cannot use parental lock.

! With some discs, parental lock operates to

skip certain scenes only, after which normal
playback resumes. For details, refer to the
discs instructions.

Changing the level

You can change the set parental lock level.

1 Touch SETUP and VISUAL and then

touch PARENTAL.

2 Touch 09 to input the registered code

number.

3 Touch ENTER.

This enters the code number, and you can now

change the level.

# If you input an incorrect code number, the
icon

is displayed. Touch C and input the cor-

rect code number.
# If you forget your code number, refer to If you
forget your code number on this page.

4 Touch c or d to select the desired level.

The new parental lock level is set.

If you forget your code number

Refer to Changing the level on this page, and

touch C 10 times. The registered code number

is canceled, letting you register a new one.

To play back bonus groups

Some DVD audio discs have an extra bonus

group that requires a four digit password to

access. See the disc packaging for details and

the password. When you try and play the

bonus group, the password input screen will

automatically appear.

! The bonus group can be played back after

the password has been entered until the

disc is removed from the unit.

1 Touch SETUP and OTHERS and then

touch BONUS GROUP.

2 Touch 09 to input a four digit pass-

word.

# If you input an incorrect password, touch C
and then input the correct password.

3 While the input number is displayed,

touch ENTER.

Setting remote control

code type

When the remote control operation switch is

set to DVD, changing the remote control code

type enables you to operate the Pioneer DVD

player by the supplied remote control. There

are three remote codes, code type A, code

type B and code type AVH. When using this

unit with a multi-DVD player (e.g. XDV-P9II),

select code A. When using this unit with a

DVD navigation unit, select code B. When

using this unit only, select code AVH.

Setting up the DVD

player

Section

Setting

up
the

DVD

player