Pioneer AVH-P7500DVD - Manual (Page 32)

Using news program interruption
When a news program is broadcast from a
PTY code news station the unit can switch
from any station to the news broadcast sta-
tion. When the news program ends, reception
of the previous program resumes.
% Press TA/NEWS and hold to turn on
news program interruption.
Press TA/NEWS until dNEWS or N appears in
the display.
# To turn off news program interruption, press
TA/NEWS and hold again.
# A news program can be cancelled by pressing
TA/NEWS.
# You can also cancel the news program by
pressing SOURCE or BAND/ESC or by moving
the joystick while a news program is being re-
ceived.
Note
You can also turn on or off news program using
NEWS. To display NEWS, touch A.MENU and
FUNCTION and then touch NEXT.
Receiving PTY alarm broadcasts
PTY alarm is a special PTY code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code, ALARM appears on the display
and the volume adjusts to the TA volume.
When the station stops broadcasting the
emergency announcement, the system re-
turns to the previous source.
! An emergency announcement can be can-
celled by pressing TA/NEWS.
! You can also cancel an emergency an-
nouncement by pressing SOURCE or
BAND/ESC or by moving the joystick.
Using radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the name of the currently broadcast
song and the name of the artist.
! The tuner automatically memorizes the
three latest radio text broadcasts received,
replacing text from the least recent recep-
tion with new text when it is received.
Displaying radio text
You can display the currently received radio
text and the three most recent radio text.
1 Press BACK/TEXT and hold to display
radio text.
Radio text for the currently broadcasting sta-
tion is displayed.
# You can cancel radio text display by touching
ESC or pressing BAND/ESC.
# When no radio text is received, NO TEXT is
displayed.
2 Move the joystick left or right to recall
the three most recent radio text.
Moving the joystick left or right switches be-
tween the current and the three radio text data
displays.
# If there is no radio text data in memory the dis-
play will not change.
Storing and recalling radio text
You can store data from up to six radio text
transmissions at buttons 16.
1 Display the radio text you want to
store in memory.
Refer to Displaying radio text on this page.
2 Press any of 16 and hold to store the
selected radio text.
The memory number will display and the se-
lected radio text has been stored in memory.
The next time you press the same 16 button
in the radio text display the stored text is re-
called from memory.
RDS
En
32
Section
06