Blaupunkt ISTANBUL C73 - Manual (Page 22)

80
Resetting the tape counter
The tape counter is automatically reset
when the cassette is changed.
Fast tape winding
Fast-forwarding
➮
Briefly press the joystick
7
to the
right.
“FORWARD” appears in the display.
Fast-rewinding
➮
Briefly press the joystick
7
to the
left.
“REWIND” appears in the display.
Stopping fast tape winding
To stop fast tape winding,
➮
briefly press the joystick
7
in the
opposite direction.
Skipping blank spaces
(blankskip)
You can make the unit automatically
skip blank spaces on the tape that are
longer than ten seconds. To do so, the
blankskip feature must be activated.
Switching blankskip on/off
➮
Press the softkey
4
assigned to
the “BLS” display item.
The current setting “BLS ON” or “BLS
OFF” appears briefly in the display when
switching on/off.
Dolby* B noise suppression
If you play cassettes that were record-
ed using the Dolby B process, you
should switch on the Dolby feature.
➮
Press the softkey
4
assigned to
the “DLBY” display item.
“DLBY ON” or “DLBY OFF” appears
briefly in the display.
* Noise suppression system manufactured
under license from Dolby Laboratories. The
word “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
Traffic information in cassette
mode
The “TA” function (traffic announcement
priority) means that your device is ready
to receive traffic messages even whilst
a cassette is being played. If a traffic
message is received, cassette playback
is stopped and the traffic message is
played. For further details, read the
chapter entitled “Traffic information”.
CASSETTE MODE