Radio mode – Blaupunkt ISTANBUL C73 User Manual
Page 18
76
Activating PTY
To use the PTY function,
➮
press the TUNER button
<
in ra-
dio mode.
The radio functions menu appears in the
display.
➮
Press the softkey
4
assigned to
the “PTY” display item.
If PTY is activated, the display shows
the current programme type. PTY ap-
pears in the display. The programme
types are displayed alongside the
softkeys
4
.
Cancelling PTY
To cancel the PTY function,
➮
Whilst the programme types are
being displayed, press the softkey
4
assigned to the “OFF” display
item.
Selecting a programme type and
starting seek tuning
The PTY menu is made up of several
pages on which the known programme
types are displayed. To browse through
the PTY menu’s pages,
➮
keep pressing the NEXT button
3
until the required programme type
appears alongside one of the
softkeys.
➮
Press the softkey
4
assigned to
the required programme type.
➮
Move the joystick
7
up/right or
down/left to start seek tuning.
The next receivable station correspond-
ing to your selected programme type will
then be tuned into.
If no station is found that corresponds
to the selected programme type, you will
hear a beep sound and “NO PTY” ap-
pears briefly in the display. The radio
will then retune to the station that was
received last.
Note:
If you want to switch back to the pro-
gramme types display,
➮
briefly move the joystick
7
in any
direction.
Optimising radio reception
Treble reduction feature during
interference (HiCut)
The HiCut function improves the sound
during poor radio reception. If interfer-
ence occurs, the treble is automatically
reduced thus reducing the interference
level.
Setting HiCut
➮
Press the TUNER button
<
in ra-
dio mode.
The first page of the radio functions
menu is displayed.
➮
Press the NEXT button
3
.
➮
Press the softkey
4
assigned to
the “HCUT” display item.
➮
Move the joystick
7
up/right or
down/left to set the HiCut.
➮
Press the joystick OK
7
or the
MENU button
8
to close the
menu.
The settings are saved.
RADIO MODE