Installation procedure, Se ct io n – Belkin F1UP002 User Manual

Page 17

Text mode
Original mode

Installation Procedure

If the DHCP server is unavailable or not found, the user
will be prompted to configure the TCP/IP settings of the
Print Server manually by clicking “Yes” on the screen
below. Clicking “No” will make the Print Server search for
the IP address from a DHCP server on the network.

Select “Yes” to configure the TCP/IP settings in the “Manual
IP” section. The default TCP/IP-address information in
the Manual-IP mode will be what is shown below.

IP Address: 192.168.2.253

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.2.1

DNS: 0.0.0.0

Make sure that the TCP/IP information configured here is
correct and matches your network settings. Click “Next”
to continue on to step 3 in the installation process.