Olympus PT056 - Manual (Page 20)

EN 20
EN
Load the digital camera
1 Confirm that the digital camera is OFF.
2 Gently insert the digital camera with the antireflective ring attached to
it into the Case.
3 Insert 2 piling up silica gel bags (1g) between the bottom of the digital
camera and the Case.
The silica gel bag provided for prevention of fogging.
Make sure the camera is loaded properly
Check the following points before sealing the Case.
• Is the digital camera loaded properly?
• Is silica gel inserted all the way at the specified location?
• Is the O-ring attached properly to the opening on the Case?
• Is there any dirt or foreign matter on the O-ring or the O-ring contact
surface on the front lid?
CAUTION:
• The silica gel bag will be caught when the Case is sealed and water
leakage will occur.
• Once silica gel has been used, the moisture absorption performance will
be impaired. Always replace the silica gel when the Case is opened and
closed.
2
3
PT-056_EN.book Page 20 Thursday, February 13, 2014 11:12 AM