Using the fiber cable adapter – Olympus PT056 User Manual
Page 13
EN 13
EN
Using the fiber cable adapter
The fiber cable adapter is required when connecting the separately
available UFL-1 underwater flash to the Case using an underwater optical
fiber cable (optional: PTCB-E02).
How to install
1
Attach the optical fiber cable adapter to the diffuser shown in the figure
below.
2
Put the underwater optical fiber cable plug all the way into the optical
cable insertion slot of the adapter until the black axis of the connector
is hidden.
Remove the underwater optical fiber cable when you do not use it while
taking picture.
Memo:
The STYLUS TG-3’s RC mode can be used.
When UFL-2 is used, set camera and UFL-2 to RC mode.
For details, see the instruction manual of digital camera and UFL-2.
PT-056_EN.book Page 13 Thursday, February 13, 2014 11:12 AM