Olympus 1200 - Manual (Page 23)

Me
nu opera
tions
EN
23
[COMBINE IN CAMERA 1]
Take pictures automatically for a panoramic picture and combine the pictures for a single
panoramic picture using your camera. Only combined pictures are saved.
[COMBINE IN CAMERA 2]
Take pictures manually for a panoramic picture and combine the pictures for a single
panoramic picture using your camera. Only combined pictures are saved.
OK EXIT OK EXIT OK EXIT OK EXIT
• Take the first picture.
• When you slightly move the camera in the direction of the next picture, a target mark and a pointer
appear.
• The pointer moves as you pan the camera. Move the camera slowly and steadily until the pointer
overlaps the target mark, then stay still.
• The camera shoots the second picture automatically.
• After the current subject appears on the monitor, take the third picture in the same manner as the
second one.
• After the third picture is taken, the pictures are automatically combined, and then the combined
picture is displayed. To combine only two pictures, press
e before shooting the third picture.
2nd 3rd
Target mark Pointer
Connects pictures
from left to right
1st
Connects pictures
from left to right
• Use
43 to specify at which edge you want to connect the pictures, and then take the first
picture.
• Compose your second shots so that the edge of the first picture overlaps the edge of the second
picture, then shoot.
• Take the third picture in the same manner as the second one.
• After the third picture is taken, the pictures are automatically combined, and then the combined
picture is displayed. To combine only two pictures, press
e before shooting the third picture.
OK EXIT OK EXIT OK EXIT
1st 2nd 3rd