Olympus TG-310 - Manual (Page 32)

32 EN
4 Press the shutter button to take the next shot.
To combine only two pictures, press the A button
before taking the third frame.
5 Repeat steps 3 and 4 to take a third frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving an
image, press the m button.
Taking pictures with [PC] Taking pictures with [PC]
1 Use FGHI to select the direction that the frames
are combined.
2 Press the shutter button to take the fi rst frame, and
then compose the second shot.
PC PC
1 2 1 2
MENU Exit
PC PC
OK Set
Before fi rst shot
After fi rst shot
After the fi rst shot, the area shown in white
reappears on the side of the display opposite the
pan direction. Frame subsequent photographs so
that they overlap with the image in the monitor.
●
●
3 Repeat Step 2 until the number of desired frames is
taken, and then press the A button or m button
when fi nished.
Panorama shooting is possible for up to 10 frames.
Refer to the PC software help guide for details on
how to make panorama images.
Shooting 3D images (W mode)
In this mode, 3D images are shot for viewing on
3D-compatible display devices.
Images shot in 3D mode cannot be displayed in 3D
on this camera’s monitor.
1
Set the shooting mode to W.
AUTO AUTO
N
ORM
14 M
44
3D Photo 3D Photo 3D 3D P P
MENU MENU
0.0 0.0
2
Press G to go to the submenu.
3
Use HI to select [Auto] or [Manual] and
then press the A button to set.
Submenu 1 Description
Auto
After shooting the fi rst frame, overlap
the subject with the image in the
monitor. The next frame is taken
automatically.
Manual
After shooting the fi rst frame, move
the camera to overlap the subject
with the image in the monitor. Then
manually release the shutter.