Olympus WS833 - Manual (Page 29)

2
Recording
29
EN
Recording
Monitoring while recording
You can monitor the recording as you are
making it by listening on the earphone
plugged into the voice recorder’s EAR jack.
Use the
+/– button to adjust the recording
monitor volume.
1 Connect the earphones to the
voice recorder’s EAR jack.
To EAR
jack
• Changing the volume will not affect
the recording level.
NOTE
• To avoid unpleasantly loud sound, set
the volume to [00] before plugging in
the earphone.
• To prevent feedback, do not place the
earphone near the microphone while
recording.
Recording settings
Various recording settings are available,
letting you tailor recording to different
recording conditions.
[Rec Level]
(
☞ P.63)
Sets the recording sensitivity.
[Rec Mode] *1
(
☞ P.64)
Sets the recording sound
quality.
[Zoom Mic] *2
(
☞ P.64)
Sets the built-in stereo
microphone’s directivity.
[Low Cut Filter]
(
☞ P.65)
Reduces humming sounds
from equipment such as
air-conditioners or projectors.
[VCVA]
(
☞ P.65)
Sets the trigger level for
voice-activated recording
(VCVA).
[V-Sync. Rec]
(
☞ P.67)
Sets the trigger level for
voice-synchronized recording.
[Rec Scene]
(
☞ P.32)
Used to select one of multiple
preregistered templates of
recording settings. When
selected, each template
enters several settings
tailored to a particular
recording location or
condition all in a single
operation.
*1 When [FM Radio] mode is set, [Rec Mode]
is fixed at one of the settings below
(WS-833 model only).
• [MP3 256 kbps]
• [MP3 128 kbps]
*2 WS-833 model only