Olympus WS833 - Manual (Page 14)

1
Charging the ba
tter
y
14
EN
Charging the battery
4 Charging is finished when
[Battery full] appears.
When charged with
the power turned off
When charged with
the power turned on
Displayed when the
battery is fully charged
NOTE
• Use only the Olympus USB connecting
AC adapter model provided (A514).
NOTE
• The power of the PC must be ON to
charge the battery using the USB
connector.
You cannot charge the battery when
the power of the PC is OFF, or the PC
is in standby, sleep or auto power OFF
mode.
• Do not use a USB hub when charging
the battery by connecting to the PC.
• Before charging the battery, insert the
rechargeable battery provided and set
[Battery] to [Ni-MH].
• You cannot charge the battery if [ ] *1
or [ ] *2 is blinking. Charge the battery
in an ambient temperature of between 5
and 35°C (41 and 95°F).
*1 [ ] Ambient temperature is too
low.
*2 [ ] Ambient temperature is too
high
• If battery life has become noticeably
short on a full charge, replace the
battery with a new one.
• Insert the USB connector securely all
the way. Operation will not be normal if
the connection is not made properly.
• Use the USB extension cable provided if
needed (only for WS-833 model).
• Use only a compatible Olympus USB
extension cable. Operation is not
guaranteed if a battery from another
manufacturer is used. Only use the
Olympus USB extension cable with
the voice recorder and never use if a
product from another manufacturer
is used.
• To charge the battery with [USB
Settings] set to [Composite], set [USB
Connection] to [Optional] before
connecting the USB cable.
When you select [AC Adapter] for the
[USB Connection] you can charge the
battery (
☞ P.89).