Information, 117 en – Olympus EPL5 User Manual
Page 117
117
EN
Information
10
Flash
Flash control mode
TTL-AUTO (TTL pre-fl ash mode)/MANUAL
Sync speed
1/250 s or slower
External connector
Multi-connector (USB connector, AV connector)/HDMI micro connector (type D)/Accessory port
Power supply
Battery
Li-ion Battery ×1
Dimensions/weight
Dimensions
110.5 mm (W) × 63.7 mm (H) × 38.2 mm (D) (4.4" Ч 2.5" Ч 1.8")
(excluding protrusions)
Weight
Approx. 325 g (0.7 Ib.) (including battery and memory card)
Operating environment
Temperature
0 °C - 40 °C (32 °F - 104 °F) (operation)/–20 °C - 60 °C (–4 °F - 140 °F)
(storage)
Humidity
30% - 90% (operation)/10% - 90% (storage)
HDMI, the HDMI logo and High-Defi nition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
FL-LM1 Flash
Guide number
7 (ISO100•m) (10 (ISO200•m))
Firing angle
Covers the picture angle of a 14 mm lens (equivalent to 28 mm in 35 mm
format)
Dimensions
Approx. 39.2 mm (W) × 32.2 mm (H) × 43.4 mm (D) (1.5" Ч 1.3" Ч 1.7")
Weight
Approx. 25 g (0.06 Ib.)
Lithium ion battery
MODEL NO.
BLS-5
Product type
Rechargeable Lithium ion battery
Nominal voltage
DC 7.2 V
Nominal capacity
1150 mAh
No. of charge and discharge times
Approx. 500 times (varies with usage conditions)
Ambient temperature
0 °C - 40 °C (32 °F - 104 °F) (charging)
Dimensions
Approx. 35.5 mm (W) × 12.8 mm (H) × 55 mm (D) (1.4" Ч 0.5" Ч 2.2")
Weight
Approx. 44 g (0.1 Ib.)
Lithium ion charger
MODEL NO.
BCS-5
Rated input
AC 100 V - 240 V (50/60 Hz)
Rated output
DC 8.35 V, 400 mA
Charging time
Approx. 3 hours 30 minutes (room temperature)
Ambient temperature
0 °C - 40 °C (32 °F - 104 °F) (operation)/
–20 °C - 60 °C (–4 °F - 140 °F) (storage)
Dimensions
Approx. 62 mm (W) × 38 mm (H) × 83 mm (D) (2.4" Ч 1.5" Ч 3.3")
Weight (without AC cable)
Approx. 70 g (0.2 Ib.)
• The AC cable supplied with this device is for use only with this device and should not be
used with other devices. Do not use cables for other devices with this device.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR
OBLIGATION ON THE PART OF THE MANUFACTURER.