Olympus LS-14 - Manual (Page 93)

8
Tr
oubleshooting
93
EN
Troubleshooting
Symptom Probable cause Action
Noise is audible through the
recording monitor
Acoustic feedback is occurring.
If the built-in speaker amps are used to
monitor recording, there is a risk that audio
feedback will occur while recording. It is
recommended that you use earphones to
monitor recording, or turn [ Rec Monitor ] to
[ Off ] before starting recording (
☞ P.68).
Make adjustments, such as further
distancing the earphones from
the microphones, not pointing the
microphones at the earphones, or lowering
the volume of the recording monitor.
Cannot record using overdubbing
The chosen playback file is not a
[
PCM 44.1kHz/16bit ] format file.
Choose a [ PCM 44.1kHz/16bit ] format file
for playback (
☞ P.25, P.60).
[ Rec Format ] is not set to
[
PCM 44.1kHz/16bit ].
Set [ Rec Format ] to
[ PCM 44.1kHz/16bit ] (
☞ P.66).
Unable to set index marks, temp
marks
The maximum number of marks has been
reached.
Erase unnecessary marks ( ☞ P.45).
The file is locked. Unlock the file ( ☞ P.51).
The file is read-only.
Unlock the file or cancel the file’s read-only
setting on the PC.
The PC is unable to recognize the
recorder
[ USB Connection ] is set to [ AC Adapter ]. Set [ USB Connection ] to [ PC ] ( ☞ P.76).