Olympus LS-14 - Manual (Page 17)

1
HOLD
17
EN
HOLD
If you set the recorder to HOLD mode, the current settings will be preserved and all buttons will be disabled. This
feature is useful when the recorder has to be carried in a bag or pocket. This mode can also prevent you from
accidentally stopping recording.
Setting the recorder to HOLD mode
▌
Slide the POWER/HOLD switch to the
[ HOLD ] position.
Exiting HOLD mode
▌
Slide the POWER/HOLD switch to the A
position.
• After [ Hold ] appears on the display, the recorder is
set to HOLD mode.
Notes
• If you press any button while the recorder is in HOLD mode, the clock screen lights for 2 seconds, but the
recorder does not operate.
• If HOLD is applied during playback (recording), operation is disabled with the playback (recording) state
unchanged (When playback has ended or recording has ended due to the remaining memory being used up,
the recorder stops).
• The recorder can be effectively operated via the exclusive remote control set RS30W (optional), even when it is in
HOLD mode.