Olympus FE-310 - Manual (Page 43)

Get
ting
to know your camera
be
tt
er
EN
43
• When a card has been inserted in the camera, the pictures in the internal memory cannot
be played back. Pull out the card before operating the camera.
• Play back a picture, and press g/E. Press g/E repeatedly to change the amount
of information displayed.
g “g/E button Changing the information on display/Display the menu guide” (P. 13)
• Turn the zoom lever to the W-side to display the pictures as thumbnails (index display).
g “Zoom lever Zooming while shooting/Close-up playback” (P. 16)
• Once sound is added to a picture, it is not possible to erase the sound. In this case, make
a re-recording with silence.
g “R Adding sound to still pictures” (P. 25)
The size of the picture displayed on a computer screen changes depending on the computer
settings. When the monitor setting is 1,024 × 768 and you are using Internet Explorer to view
a picture with an image size of 2,048 × 1,536 at 100%; the entire picture cannot be viewed
without scrolling. There are several ways you can view the entire picture on the computer
screen.
View the picture using image browsing software
• Install the OLYMPUS Master 2 software from the provided CD-ROM.
Change the monitor setting
• The icons on the computer desktop may be rearranged. For details of changing the
settings on your computer, refer to the computer’s instruction manual.
Playback tips
Playing back pictures in the internal memory
Viewing picture information
Quickly displaying a desired picture
Erasing sound recorded to still pictures
Viewing pictures on a computer
Viewing the entire picture on a computer screen
When you get an error message on the camera...
Monitor indication Possible cause Corrective action
q
CARD ERROR
There is a problem with the
card. This card cannot be used. Insert a new
card.
q
WRITE PROTECT
Writing to the card is
prohibited. The recorded image has been protected
(read-only) on a computer. Download the
image to a computer and cancel the read-
only setting.
>
MEMORY FULL
The internal memory has no
available memory and
cannot store any new data. Insert a card or erase unwanted data.
Before erasing, backup the data of
important pictures using the card or
download such pictures to a computer.