Olympus PT-EP10 - Manual (Page 12)

EN 11
EN
3. Loading the digital camera
Check the digital camera
Check the digital camera before loading it in the Case.
1. Battery confirmation
It is impossible to change the batteries when using the Case. Make sure that you have sufficient
remaining battery capacity before use.
2. Check the remaining number of pictures
Check that the image storage medium has enough room for the number of pictures you want to take.
3. Remove the strap, lens cap and filter from the digital camera.
If the digital camera is loaded without removing the strap, lens cap and the Case cannot be sealed
properly and water leakage may be caused.
4. Remove the grip from the camera.
5. Attach the zoom gear (optional) and the antireflective ring (optional).
For details, refer to the instruction manual of the zoom gear and the antireflective ring.
* M.ZUIKO DIGITAL ED 12-50mm can be used without the zoom gear and anti-reflection ring. When using this
lens, set the zoom ring position to “E-ZOOM”.
For details, refer to the instruction manual of the digital camera.
Zoom gear Antireflective ring
M.ZUIKO DIGITAL ED 14-42mm PPZR-EP01 POSR-EP01
M.ZUIKO DIGITAL 14-42mm II/IIR PPZR-EP02 POSR-EP03/05
M.ZUIKO DIGITAL ED 9-18mm PPZR-EP02 POSR-EP02
M.ZUIKO DIGITAL ED 60mm Macro PPZR-EP03 –
Antireflective ring
PT-EP10_EN.Book Page 11 Thursday, September 20, 2012 5:44 PM