Olympus DS-3000 - Manual (Page 12)

DSS Player Pro INSTALLATION GUIDE
12
Getting Ready
Connecting the DS-3000 Digital Recorder
The DS-3000 works with both the Dictation Module and the Transcription Module.
Notes
• Make sure you finish installing DSS Player Pro before connecting the DS-
3000. If you connect the DS-3000 before installing DSS Player Pro, the “Add
New Hardware Wizard” dialog box will open. If this happens, click “Cancel”
to exit the wizard and install DSS Player Pro ( P.7).
• Before connecting the USB cable to the DS-3000, make sure that the DS-
3000 is in the stop mode, with its rear-panel POWER/LOCK switch ON and
that the HOLD switch is not set to the HOLD position.
1
Insert connector A USB cable
into the PC’s USB port.
2
Attach connector B USB cable to
the DS-3000.
When the software recognizes the
DS-3000, DSS Player Pro launches automatically.
Notes
• For information about your PC’s USB ports, refer to the user’s guide
supplied with the PC.
• Never remove the USB cable while a communication session is in progress.
Data files could be damaged if you do.
B A