30 en – Olympus STYLUS 1040 User Manual
Page 30

30 EN
Creating an index of 9 frames from a
movie [INDEX]
E EDIT X INDEX
INDEX
SET
OK
MENU
BACK
1
Use
FD
to select a movie, and press
the x button.
2
Use
CEFD
to select the fi rst frame,
and press the x button.
3
Use
CEFD
to select the last frame,
and press the x button.
9 frames are extracted and saved as a single
still image (INDEX).
Protecting images [
0]
q PLAYBACK MENU X 0
Protected images cannot be erased by
[ERASE] (p. 15), [SEL. IMAGE], or [ALL
ERASE] (p. 31), but all images are erased
by [MEMORY FORMAT]/[FORMAT] (p. 32).
Submenu 2
Application
OFF
Images can be erased.
ON
Images are protected so that
they cannot be erased except
by formatting of the internal
memory/card.
1
Use
FD
to select an image.
2
Use
CE
to select [ON].
3
If necessary, repeat Steps 1 and 2 to
protect other images, and press the x
button.
●
Rotating images [y]
q PLAYBACK MENU X y
Submenu 2
Application
U +90°
The image is rotated 90°
clockwise.
V 0°
The image is not rotated.
t -90°
The image is rotated 90° counter-
clockwise.
1
Use
FD
to select an image.
2
Use
CE
to select the rotation direction.
3
If necessary, repeat Steps 1 and 2 to
make settings for other images, and press
the x button.
The new picture orientations will be saved
even after the power is turned off.
Adding sound to still images [R]
q PLAYBACK MENU X R
Submenu 2
Application
YES
The camera adds (records) sound
for approx. 4 seconds while
playing back the image. This
is useful for recording notes or
comments about the image.
NO
No sound is recorded.
1
Use
FD
to select an image.
2
Aim the microphone towards the sound
source.
3
Use
CE
to select [YES], and press the
x
button.
Recording starts.
●
Microphone
d4377_e_oima_000_book_cs2e.indb 30
d4377_e_oima_000_book_cs2e.indb 30
7/1/2008 12:09:04 PM
7/1/2008 12:09:04 PM