Olympus FE-3010 - Manual (Page 32)

32 EN
Selecting a video signal system to match your TV [ VIDEO OUT]
E SETUP X VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV’s video signal type.
Submenu 2 Application
NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on.
PAL Connecting the camera to a TV in European countries, China, and so on.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV
1 Connect the TV and camera.
Connect to the TV video
input jack (yellow) and
audio input jack (white).
Multi-connector
AV cable (supplied)
2 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/
[PAL]).
3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”
For details on changing the input source of the TV, refer to the TV’s instruction manual.
4 Press the q button, and use klmn to select the image for playback.
Depending on the TV’s settings, the displayed images and information may become cropped.
book_d4385_86_en_UA.indb 32 book_d4385_86_en_UA.indb 32 2008/12/05 14:46:13 2008/12/05 14:46:13