Olympus LS-12 - Manual (Page 84)

7
C
onnec
ting t
o
y
our PC
84
EN
3
While the recorder is in stop mode
or turned off, connect the USB
cable to the connecting terminal of
the recorder.
1
Boot the PC.
2
Connect the USB cable to the USB
port of the PC.
Notes
• Refer to the user’s manual for your PC regarding the
USB port on your PC.
• Be sure to push the cable connector all the way in.
Otherwise, the recorder may not operate properly.
• When the recorder is connected through a USB
hub, operation may become unstable. In such
cases, refrain from using a USB hub.
• Use the dedicated USB cable. If any other
company’s cable is used, it may lead to malfunction
of the recorder. Also, never use this dedicated cable
with any other company’s products.
• [ Remote (Storage) ] is displayed on the
recorder if the USB connector is connected.
• The recorder does not establish a
connection with a PC if [ AC Adapter ] is
selected in the USB connection setting.
Select [ PC ] in the USB connection setting
(
☞ P.76).
Windows:
When you connect the recorder to Windows
and open [ My Computer ], it is recognized by
the drive name of the product.
Inserting an SD card will allow you to use it as
[ Removable Disk ].
Macintosh:
When you connect the recorder to
Mac OS, it is recognized by the drive name of
the product on the desktop. If an SD card is
inserted, [ Untitled ] is displayed.
Connecting to your PC