Olympus LS-12 - Manual (Page 21)

1
LOCK
Inser
ting and ejec
ting an SD car
d
21
EN
Inserting and ejecting an SD card
Ejecting an SD card
1
While the recorder is in stop mode,
open the card cover.
2
Push the SD card inward to unlock
it, and let it eject partially.
The SD card is visibly out of the slot and can be
removed safely.
Notes
• Quickly moving your finger away after pushing the
SD card inward may cause it to eject forcefully out
of the slot.
• Some SD cards or SDHC cards may not be
recognized correctly depending on the
manufacturer or type of card due to compatibility
issues with this recorder.
• See the Olympus website for a list of SD cards
that have been confirmed to operate with this
recorder in conditions prescribed by Olympus. The
website http://olympus-imaging.jp/ introduces
manufacturers and types of SD cards confirmed
to be compatible. Please note, however, this
is not meant to guarantee that SD cards will
operate. Some SD cards may not be recognized
correctly due to circumstances such as changes in
manufacturer specifications.
• Always read the instructions that come with your
SD card before using it.
• If an SD card is not recognized, remove the SD
card and then insert it again to see if the recorder
recognizes the SD card.
• Processing speed may be slower with some types
of SD cards. Processing performance may also be
reduced due to repeated writing and deleting. If
that happens, reformat the SD card (
☞ P.78).
• If you eject the SD card when
[ Memory Select ] is set to [ SD card ],
[ Memory Select ] will automatically change
to [ Internal memory selected ].
3
Close the card cover securely.
SD card
When the write protection switch is set to
[ LOCK ], you cannot record or erase files.
Write protection switch