Olympus LS-12 - Manual (Page 35)

2
4
7
6
5
Recor
ding
35
EN
Recording
a
To EAR jack
• Set [ Rec Monitor ] to [ On ] ( ☞ P.68).
4
While the recorder is in stop mode,
press the
F3 ( OVER DUB ) button.
• If the Mode dial is set to [ QUICK ], recording
and playback will start simultaneously.
Proceed to Step 7.
• If the Mode dial is set to [ MANUAL ],
playback will start first.
3
Connect earphones to the EAR jack
of the recorder.
• The file to be dubbed over will be played
back through the EAR jack.
Using the overdubbing function
The overdubbing function enables you to dub sound
over a file while listening to it. The recorded file is
saved under a different name. This is useful when
practicing songwriting and musical instruments.
A
When using the overdubbing function, the following
conditions must be met:
• Select a (.wav) file with the format
[ PCM 44.1kHz/16bit ] as the file to be played
( ☞ P.25, P.60).
• Set [ Rec Format ] to [ PCM 44.1kHz/16bit ]( ☞ P.66).
1
Switch the Mode dial to the [ QUICK ]
or [ MANUAL ] position (
☞ P.28, P.30).
• This function is not enabled when the Mode
dial is set to [ SMART ].
2
Select a file to dub over (
☞ P.25).
a Overdubbing