Olympus D-300 - Manual (Page 38)

I
OK
NO YES OK 3
3
This function works when the lens cover is
closed.
1 Display a picture.
2 Press the Erase mode button and
Flash button simultaneously, the All-
Frame Erase indicator lights in the
upper right corner of the LCD monitor.
Ⅲ
To cancel, press the Erase button
again.
3 Press the Erase OK (Shutter Release)
button to erase all frames.
Ⅲ
The camera makes a short single
beep and the All-Frame Erase
indicator starts descending.
4 After several seconds all frames are erased. The blue background display will
appear on the LCD monitor.
Ⅲ If there are any protected pictures, they will not be erased and the last-taken
protected picture will be displayed when the erasing operation is completed.
Ⅲ All-Frame Erase is also available in the Multi-Display mode. (See page 39.)
◆ Be careful not to erase any pictures you don’t want to delete.
◆ Do not unload batteries while erasing frames as this may result in all
frames being erased.
All-Frame Erase
Cautions: