Olympus SP-720UZ - Manual (Page 28)

28 EN
Shooting 3D images (W mode)
In this mode, 3D images are shot for viewing on
3D-compatible display devices.
Images shot in 3D mode cannot be displayed in 3D
on this camera’s monitor.
1
Set the shooting mode to W.
3D 3D
0.0 0.0
N ORM
44 00:34 00:34
2
Press H to display the function menu.
3
Use HI to select [Auto] or [Manual] and
then press the A button to set.
Submenu 1 Description
Auto
The user only composes the
shots so that the target marks and
pointers overlap, and the camera
automatically releases the shutter.
Manual
After shooting the fi rst frame, move
the camera to overlap the subject
with the image in the monitor. Then
manually release the shutter.
Depending on the subject or the situation (if the
distance between the camera and subject is too
short), the image may not look 3D.
The 3D viewing angle varies depending on the
subject, etc.
To exit 3D shooting mode without saving an image,
press the  button.
The [Image Size] (p. 33) is fi xed to [0].
The zoom ratio is fi xed.
The focus, exposure and the white balance are fi xed
when the fi rst image is taken.
The fl ash is fi xed to [ $Flash Off].
Shooting with Beauty Fix effects
(Q mode)
Depending on the picture, the editing may not be
effective.
1
Set the shooting mode to Q.
N ORM
44
5 M
00:34 00:34
2
Press H to display the function menu.
MENU MENU
Recommended
5 M