Olympus E-M10 - Manual (Page 73)

73 EN
Using shooting options
6
ISO sensitivity
Increasing ISO sensitivity increases noise (graininess) but allows photographs to be
taken when lighting is poor. The setting recommended in most situations is [AUTO],
which starts at ISO 200 — a value that balances noise and dynamic range — and then
adjusts ISO sensitivity according to shooting conditions.
1 Press Q to select ISO sensitivity.
When shooting using the
viewfi nder
250 250 F5.6
i
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:03 01:02:03
1023 1023
Recommended ISO
When shooting using live
view
AUTO AUTO P
ii
ISO
AUTO
ISO ISO ISO
AUTO AUTO AUTO
R R
AUTO AUTO AUTO AUTO
ISO-A
200
ISO-A ISO-A ISO-A
200 200 200
250 F5.6 0.0
AUTO AUTO LOW LOW 200 200 250 250 320 320 400 400 500 500
Recommended
S-AF S-AF
ISO
sensitivity
• If you set the multi function button (P. 23) to e (ISO sensitivity/White balance) in
advance, you can press the Fn2 button to display a menu.
2 Turn the front dial to select items.
AUTO
The sensitivity is set automatically according to the shooting
conditions.
LOW, 200 – 25600 Sensitivity is set to the selected value.
Movie sound options (recording sound with movies)
1 Press the Q button when shooting with live view and select a movie sound.
When shooting using
live view
ON ON
R R
n
R R
OFF OFF ON ON
ii
ISO
AUTO
ISO ISO ISO
AUTO AUTO AUTO
R R
Movie R On
Movie sound
2 Switch ON/OFF using the front dial and press the Q button.
# Cautions
• When recording sound in a movie, the sound made by the lens and camera operating
may be recorded. If desired, you can reduce these sounds by shooting with [AF Mode] set
to [S-AF], or by limiting the amount of times you press the buttons.
• No sound is recorded in s (Diorama) mode.