Protecting images q [ r, 54 en – Olympus TG-3 User Manual
Page 54

54 EN
54 EN
For the operation method, refer to (P. 41).
To individually select and erase images [Sel. Image]
1
Use
FG to select [Sel. Image], and
press the
A button.
2
Use
FGHI to select the image to
be erased, and press the
A button to
add a R mark to the image.
• Press the zoom lever to the T
end to return to the single frame
display.
Sel. Image (1)
Erase/Cancel
OK
MENU
4/30
4/30
R mark
3
Repeat Step 2 to select the images to be erased, and then press the
button to erase the selected images.
4
Use
FG to select [Yes], and press the
A button.
• The images with a R mark are erased.
To erase all images [All Erase]
1
Use
FG to select [All Erase], and press the
A button.
2
Use
FG to select [Yes], and press the
A button.
Protecting images
q [R]
• Protected images cannot be erased by [Erase] (P. 13, 53), [Sel. Image], [Erase
Group], or [All Erase] (P. 53), but all images are erased by [Memory Format]/
[Format] (P. 55).
1
Use
HI to select an image.
2
Press the
A button.
• Press the
A button again to cancel the settings.
3
If necessary, repeat Steps 1 and 2 to protect other images, and press the
button.
• If you protect the grouped images, all images in the group will be
protected at once. To protect each image in the group, expand images.
g “Playing back panorama and grouped images” (P. 14)