Olympus VG-110 - Manual (Page 30)

30 EN
3
Press the shutter button to take the fi rst
frame, and then compose the second shot.
1 2 1 2
MENU Exit
OK Set
Before fi rst shot
After fi rst shot
After the fi rst shot, the area shown in the white
frame reappears on the side of the display
opposite the pan direction. Frame subsequent
photographs so that they overlap with the
image on the monitor.
4
Repeat Step 3 until the number of desired
frames is taken, and then press the
m button when fi nished.
Panorama shooting is possible for up to 10 frames.
For information on creating panoramas, see the
online help for the supplied software.
●
Creating panoramic images (~ mode)
Take pictures that can be joined to form a panorama using
the supplied software.
The focus, exposure, zoom position (p. 22), and white
balance (p. 33) are locked at the fi rst frame.
The fl ash (p. 31) is fi xed to $ (Flash Off) mode.
1
Set the shooting mode to ~.
44
0.0 0.0
AUTO
WB
AUTO
WB
Panorama Panorama
12 M N
ORM
2
Use FGHI to select the pan direction.