Olympus Stylus 400 Digital - Manual (Page 15)

En 15
En
When playing back pictures
Power on: Press with the lens barrier closed.
The camera turns on in the playback mode. The monitor turns
on and the last picture taken is displayed.
Power off: Press .
The monitor and the camera turn off.
• Never open the card cover, remove the card or the battery, or
connect or disconnect the AC adapter while the camera is turned on.
Doing so could destroy all data on the card. Destroyed data cannot
be restored. When changing the card, be sure to turn the camera off
before opening the card cover.
J SELECTING A LANGUAGE
1
Open the lens barrier fully.
• The lens extends and the monitor turns on.
2
Press .
• The top menu is displayed.
3
Press on the arrow pad to
select MODE MENU.
4
Press to select the SETUP tab, then press .
5
Press to select , then press .
6
Press to select a language, then press .
7
Press again to exit the menu.
8
Close the lens barrier to turn the camera off.
Note
Arrow pad ( )
basic_e_opx_6.fm Page 15 Thursday, December 12, 2002 10:44 AM