Olympus FE-370 - Manual (Page 37)

37 EN
Make the settings for the functions while referring to “Using the Menu” (p. 3).
2 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/
[PAL]).
3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”
For details on changing the input source of the TV, refer to the TV’s instruction manual.
4 Press the q button , and use abcd to select the image for playback.
Depending on the TV’s settings, the displayed images and information may become cropped.
Saving battery power between shots
[POWER SAVE]
x SETUP X POWER SAVE
Submenu 2 Application
OFF Cancels [POWER SAVE].
ON
When the camera is not being
used for approx. 10 seconds, the
monitor automatically turns off to
save battery power.
To resume standby mode
Press any button, or turn the mode dial or
zoom lever.
Turning off the camera sounds
[
j SILENT MODE]
j SILENT MODE
Submenu 1 Application
OFF
Settings in [SOUND SETTINGS]
(p. 35) become effective.
ON
The electronic sounds (operating
sound, shutter sound, warning
sound) and playback sounds are
muted.
[SOUND SETTINGS] (p. 35)
book_FE370_en.indb 37 book_FE370_en.indb 37 6/12/2008 10:44:34 AM 6/12/2008 10:44:34 AM