Olympus SP-350 - Manual (Page 18)

18
En
Use the AV cable provided with the camera to play back recorded images on your TV.
Both still pictures and movies can be played back.
1
Make sure that the TV and camera are turned off. Connect the multi-connector
on the camera to the video input terminal on the TV using the AV cable.
2
Turn the TV on and set it to video input mode.
For details of switching to video input, refer to your TV’s instruction manual.
3
Set the mode dial to
q, and press the POWER button to turn the camera on.
The last picture taken is displayed on the TV. Use the arrow pad (s/r/p/q) to select
the picture you want to display.
This function lets you show several pictures at the same time on the monitor when
reviewing pictures.
1
Pull the zoom lever toward W (G) to switch to the
thumbnail (index) display.
Use the arrow pad (s/r/p/q) to select a picture and
press Z to display it in single frame playback.
Pull the zoom lever toward W to display the pictures in
4, 9, 16 or 25 frames.
CONNECTING THE CAMERA
Playback on a TV
AV Cable
Multi-Connector
Connector Cover
Connect to the TV’s
video input (yellow) and
audio input (white)
terminals.
Thumbnail (Index) Display
Index display
d4268_69_oima_e_basic_00_bookfile_7.book Page 18 Friday, August 5, 2005 4:21 PM