BMW AG 528XI - Manual (Page 75)

Co
n
tr
o
ls
73
Re
fe
re
n
c
e
At
a
g
la
n
c
e
D
riv
in
g ti
ps
C
o
m
m
uni
ca
ti
o
n
s
Na
v
iga
ti
on
En
te
rt
a
in
m
e
n
t
M
o
bi
lity
Selecting distance
> Briefly press rocker switch downward:
Increase distance.
> Briefly press rocker switch upward:
Reduce distance.
The selected distance is displayed in the instru-
ment cluster.
Use good judgment to select the appro-
priate following distance, given road con-
ditions, traffic, applicable laws and State driving
recommendations for safe following distance.
Otherwise, a violation of the law or risk of an
accident could result.
<
Interrupting cruise control
Press the lever upward or downward, and with
the vehicle stopped also depress the brake
pedal. The marking in the speedometer
changes color and the distance indicator goes
out.
In addition, the system is automatically inter-
rupted:
> when you apply the vehicle brakes
> when you shift the transmission
> when DTC is activated or DSC is deacti-
vated
> when DSC comes on
> when you apply the handbrake
> when you release the safety belt and open
the driver's door with the vehicle stopped
> when the system does not recognize any
objects for an extended period of time, e.g.
on infrequently traveled roads without a
shoulder or guard rails, or if the radar sensor
is covered with dirt, refer to page
75
If the system is interrupted, then it is nec-
essary for the driver to actively intervene
by braking and steering. Otherwise, there is a
risk of an accident.
<
Resuming stored desired speed and
distance
While driving
Press button 4.
The displays appear in the instrument cluster.
Distance 1, closest
Distance 2
Distance 3
Distance 4, farthest
This distance is set when you acti-
vate the system.
Online Edition for Part no. 01 41 2 600 310 - © 02/08 BMW AG