BMW AG 528XI - Manual (Page 210)

Telep
h
oning
208
2. Insert the snap-in adapter at the front and
press down until it engages.
To remove the snap-in adapter:
Press the area
1 around the button.
Inserting mobile phone
1. Remove the protective cap from the mobile
phone's antenna connector if necessary, so
that the mobile phone can engage in the
snap-in adapter.
2. Push the mobile phone with the buttons
facing upward toward the electrical connec-
tions and press down until it engages.
The mobile phone's battery is charged from
radio readiness or with the steering unlocked.
To protect the vehicle's batteries, avoid
using the phone when the ignition is
switched off. <
Removing mobile phone
Press button.
Online Edition for Part no. 01 41 2 600 310 - © 02/08 BMW AG