4 removing the transport support, 5 rear spacers, 6 levelling – AEG S73200DTW0 User Manual
Page 32
7.4 Removing the transport support
2
3
Your appliance is equipped with trans-
port support to secure the door during
transportation.
To remove them do these steps:
• Open the door.
• Remove the transport support from
the door sides.
• Remove the transport support from
the lower hinge (some models).
Some models are fitted with a si-
lencing pad under the cabinet.
Do not remove this pad.
7.5 Rear spacers
• Install the spacers provided within the
accessory bag as shown in the figure.
• Install the adhesive spacers on the
back side of the appliance.
7.6 Levelling
When placing the appliance ensure that
it stands level. If necessary adjust the
feet using the adjustment spanner sup-
plied.
Door alignment is dependent on proper
levelling.
32 www.aeg.com
See also other documents in the category AEG Refrigerators:
- SKZ71800F0 (24 pages)
- SKZ71800F0 (2 pages)
- SKZ71800F0 (20 pages)
- SCZ71800F0 (24 pages)
- SCZ71800F0 (28 pages)
- SCZ71800F0 (2 pages)
- SCN71800S0 (32 pages)
- SCS51800F0 (28 pages)
- SCS51800F0 (2 pages)
- SCS51800F0 (32 pages)
- SCS51800F0 (24 pages)
- SCS71800F0 (28 pages)
- SCS71800F0 (2 pages)
- SCS71800F0 (76 pages)
- SCS71800F0 (24 pages)
- SKS58240F0 (24 pages)
- SKS58240F0 (2 pages)
- S83200CMW0 (20 pages)
- S83200CMW0 (60 pages)
- S83200CMW0 (2 pages)
- S83200CMW0 (28 pages)
- S83200CMW0 (28 pages)
- S83600CMM0 (24 pages)
- S83600CMM0 (2 pages)
- S92500CNM0 (92 pages)
- S53630CSX2 (200 pages)
- S63300KDW0 (24 pages)
- S83600CSM1 (28 pages)
- SKS58200F0 (64 pages)
- SKS58800S1 (60 pages)
- SKS71200F0 (20 pages)
- SKS58200F0 (16 pages)
- SKS58200F0 (20 pages)
- AGS77200F0 (68 pages)
- SKD71800F0 (20 pages)
- SKD71800F0 (64 pages)
- SKD71800F0 (24 pages)
- SKD71800F0 (2 pages)
- SCS81800F0 (76 pages)
- SCS81800F0 (64 pages)
- SCS81800F0 (100 pages)
- SCS81800F0 (84 pages)
- SCS81800F0 (92 pages)
- S83200CMM0 (28 pages)
- S83200CMM0 (2 pages)