beautypg.com

Care and cleaning, 2 hints for storage of frozen food, 1 periodic cleaning – AEG S73200DTW0 User Manual

Page 27

background image

• it is advisable to show the freezing in

date on each individual pack to enable
you to keep tab of the storage time.

4.2 Hints for storage of frozen
food

To obtain the best performance from
this appliance, you should:
• make sure that the commercially fro-

zen foodstuffs were adequately stored
by the retailer;

• be sure that frozen foodstuffs are

transferred from the foodstore to the
freezer in the shortest possible time;

• not open the door frequently or leave

it open longer than absolutely neces-
sary;

• once defrosted, food deteriorates rap-

idly and cannot be refrozen;

• do not exceed the storage period in-

dicated by the food manufacturer.

5. CARE AND CLEANING

CAUTION!
Unplug the appliance before car-
rying out any maintenance oper-
ation.

This appliance contains hydrocar-
bons in its cooling unit; mainte-
nance and recharging must
therefore only be carried out by
authorized technicians.

5.1 Periodic cleaning

The equipment has to be cleaned regu-
larly:
• clean the inside and accessories with

lukewarm water and some neutral
soap.

• regularly check the door seals and

wipe clean to ensure they are clean
and free from debris.

• rinse and dry thoroughly.

Do not pull, move or damage
any pipes and/or cables inside
the cabinet.
Never use detergents, abrasive
powders, highly perfumed clean-
ing products or wax polishes to
clean the interior as this will dam-
age the surface and leave a
strong odor.

Clean the condenser (black grill) and the
compressor at the back of the appliance
with a brush. This operation will improve
the performance of the appliance and
save energy consumption.

Take care of not to damage the
cooling system.

When moving the cabinet, lift it
by the front edge to avoid
scratching the floor.

Many proprietary kitchen surface clean-
ers contain chemicals that can attack/
damage the plastics used in this appli-
ance. For this reason use a soft cloth
rinsed in warm water and neutral soap
emulsion for cleaning external surfaces.

Do not use detergents or abra-
sive paste as these will damage
the paint, or stainless steel anti
finger print coating.

After cleaning, reconnect the equipment
to the mains supply.

ENGLISH

27