Billion Electric Company BIPAC 7402 - Manual (Page 9)

3G/ADSL2+ (802.11g) (VPN) Firewall Router
Chapter 2: Installing the router
8
The Ethernet Port # 4 can be used as a console port. You need a special
console tool which already includes in the package to connect with LAN
port 4 and PC’s RS-232 port (9-pin serial port).
The Rear Ports
Port Meaning
1
Antenna
(Wireless Router only)
Connect the detachable antenna to this port.
2
DSL
Connect the supplied RJ-11 (“telephone”) cable on this port
when connecting to the ADSL/telephone network.
3
USB
Connect the USB cable on this port.
4
LAN
1X — 4X
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
LAN ports when connecting to a PC or an office/home network
of 10Mbps or 100Mbps.
Caution: Port 4 can be either a LAN or Console port at a time but not
both.
5 WPS
Push WPS button to trigger Wi-Fi Protected Setup
function.
6 RESET
To be sure the device is being turned on press RESET
button for:
1-3 seconds: quick reset the device.
6 seconds above, and power off, power on the device:
restore to factory default settings. (Cannot login to the router
or forgot your Username/Password. Press the button for
more than 6 seconds).
Caution: After pressing the RESET button for more than 6 seconds,
to be sure you power cycle the device again.
7
Power
Connect the supplied power adapter to this jack.
8
Power Switch
Power ON/OFF switch
3
1 2
4 5 6
7
8