Billion Electric Company BIPAC 7402 - Manual (Page 54)

3G / ADSL2+ (802.11g) (VPN) Firewall Router
Chapter 4: Configuration
53
Restart Router
Click Restart with option Current Settings to reboot your router (and restore your last saved
configuration).
If you wish to restart the router using the factory default settings (for example, after a firmware upgrade or
if you have saved an incorrect configuration), select Factory Default Settings to reset to factory default
settings.
You may also reset your router to factory settings by holding the small Reset pinhole button more than 6
seconds on the back of your router.
Caution: After pressing the RESET button for more than 6 seconds, to be sure you power cycle the device again.