AEG S84000KMX0 - Manual (Page 18)

Rear spacers
Inside the appliance you find two spacers which
must be fitted as shown in the figure.
Slacken the screws and insert the spacer under
the screw head, then retighten the screws.
Door reversibility
WARNING!
Before carrying out any operations, remove the plug from the power socket.
To carry out the following operations, we suggest that this be made with another person
that will keep a firm hold on the door of the appliance during the operations. Gently lay the
appliance on its back.
To change the opening direction of the door, do these steps:
1.
Remove the clip-in ventilation grille, remove the plug (e) from the ventilation grille
and install it on the opposite side.
2. Remove the bottom hinge (A) by un-
screwing the fixing screws.
3. Remove the door.
4. Unscrew the pin (f) of the bottom hinge
and install it on the opposite side.
A
e
f
A
18 Installation