Brinkmann 6430 User Manual

Page 29

Text mode
Original mode

Step 16

Attach the hose heat shield to the
right side of the cart frame using
two 9# X 1/2” self-tapping screws.

Step 17

Remove two M4 bolts and spring
washers from the side burner valve.
Insert the side burner valve
assembly through the hole in the
side burner table base, then firmly
seat the valve nozzle into the burner
venturi.

WARNING! Never use your

grill without leak
testing all gas
connections and
hoses. See the
section on "Leak
Testing" in this manual
for proper procedures .

Step 18

Place the bezel over the control
knob mounting stem and position
over holes in side burner base and
side burner valve assembly. Attach
with two M4 X 10mm bolts with
spring washers which come with
valve. Then install the side burner
control knob onto valve stem.

Hose Heat Shield

Side
Burner
Valve

Burner Venturi

Valve
Nozzle

Side
Burner
Control
Knob

Bezel