Basic operation, Choose what you’re going to edit, Select an item exit the settings edit the values – Boss Audio Systems Boss CDSM AMP EFFECTS PROCESSOR GT-100 User Manual

Page 3

Basic Operation

Choose what you’re going to edit

Press one of the following buttons .

Select an item

Exit the settings

Edit the values

Editing on the GT-100 is extremely simple; the procedure is always the same . .

Use

to select an item shown in the left

display .

Press

Use

to edit the values

shown in the right display .

Effect

Here you can edit the parameters of each effect .

System

Here you can make settings that apply to the

entire GT-100, such as output settings and

phrase loop settings .

EZ (Easy) Tone

Here you can create the desired tone simply by

choosing a musical style and the type of song you

have in mind . You can also customize the amp and

overdrive/distortion settings in an intuitive way .

Control/Expression

Here you can assign the desired functions to the

[ACCEL/CTL] pedal, [EXP] pedal, and external

pedals .

Turn the knobs

to edit the

values .

If page tabs are shown in the screen, you can use the

[PAGE] buttons to move between tabs .

The screen shown here is an example of when you’ve pressed the

[EFFECT] button .

You’ll be returned to the Play screen .

Turn knob [4] to select the

desired item (the cursor will

move) .

page 5

page 4

page 26

page 31

NOTE

The settings you’ve edited will be lost when you switch patches . If you want to keep the edited settings, you must save them as a user patch

(Owner’s Manual: p . 13) .