AEG FT 4925 - Manual (Page 79)

English
79
• Do not measure body temperature within 30 minutes after meals, exer-
cise or bath.
• The body temperature may be increase while taking medicine.
Please don´t measure.
• In order to ensure the accuracy of measurement data, please don´t take
measurement of body temperature in strong electromagnetic inter-
ference environment (such as microwave, high frequency equipment
operation environment, such as answering the phone).
• When the environment changes a lot (for instance, from indoor to out-
door), please wait in the new environment for about 30 minutes before
measuring the new temperature.
• The intervals shall be 10 seconds when constant measurement are
made. It is normal that there are deviations in constant measurement
between short intervals, in which case the average reading can be taken
as the result.
• There is no absolutely standard value of body temperature. For healthy
persons the temperature can fluctuate between 0.2 ~ 1°C (32.36 ~
33.8°F) in different areas of the body. Always measure the body tem-
perature at the same time of the day.
• When the environmental temperature exceeds the functional tempera-
ture range of the device, the device will show “Err“ symbol.
• When the temperature of the measured is lower than 32.0°C, “Lo“
symbol will be displayed on the screen; when the temperature of the
measured is higher than 42.9°C, “Hi“ symbol will be displayed on the
screen.