beautypg.com

Care and cleaning, What to do if – AEG HE604078XB User Manual

Page 25

background image

CARE AND CLEANING

Clean the appliance after each use.

Always use cookware with clean bottom.
WARNING!

Sharp objects and abrasive cleaning agents will damage the appliance.

For your safety, do not clean the appliance with steam blasters or high-pressure cleaners.

Scratches or dark stains on the glass ceramic have no effect on how the appliance operates.

To remove the dirt:
1.

– Remove immediately:melted plastic, plastic foil, and food with sugar. If not, the dirt

can cause damage to the appliance. Use a special scraper for the glass . Put the

scraper on the glass surface at an acute angle and move the blade on the surface .

– Remove after the appliance is sufficiently cool:limescale rings , water rings, fat

stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic

or stainless steel.

2.

Clean the appliance with a moist cloth and some detergent.

3.

At the end rub the appliance dry with a clean cloth.

WHAT TO DO IF…

Problem

Possible cause and remedy

You cannot activate the appli-

ance or operate it.

• Activate the appliance again and set the heat setting in 10

seconds.

• You touched 2 or more sensor fields at the same time. Only

touch one sensor field.

• The Stop+Go operates. See the chapter Operating instruction.
• There is water or fat stains on the control panel. Clean the

control panel.

A Sound operates and the ap-

pliance deactivates.

A sound operates when the ap-

pliance is deactivated.

You put something on one or more sensor fields. Remove the ob-

ject from the sensor fields.

The residual heat indicator does

not comes on.

The cooking zone is not hot because it operated only for a short

time. If the cooking zone should be hot, speak to the service cen-

tre.

The Automatic Heat Up func-

tion does not operate.

The highest heat setting is set. The highest heat setting has the

same power as the Automatic Heat Up function.

You cannot activate the outer

ring.

Activate the inner ring first.

The sensor fields become hot.

The cookware is too large or you out it too near to the controls.

Put large cookware on the rear cooking zones if it is necessary.

Care and cleaning

25